AI Avatar Agency

AI Avatar Agency — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • World Database of Happiness

    World Database of Happiness

    The World Database of Happiness is a web-based archive of research findings on subjective appreciation of life, based in the Erasmus Happiness Economics Research Organization of the Erasmus University Rotterdam in The Netherlands. The database contains both an overview of scientific publications on happiness and a digest of research findings. Happiness is defined as the degree to which an individual judges the quality of his or her life as a whole favorably. Two 'components' of happiness are distinguished: hedonic level of affect (the degree to which pleasant affect dominates) and contentment (perceived realization of wants). == Aims == The World Database of Happiness is a tool to quickly acquire an overview on the ever-growing stream of research findings on happiness Medio 2023 the database covered some 16,000 scientific publications on happiness, from which were extracted 23,000 distributional findings (on how happy people are) and another 24,000 correlational findings (on factors associated with more and less happiness). The first findings date from 1915. == Technique == The World Database of Happiness is a ‘findings archive’, which consists of electronic ‘finding pages’ on which separate research results are described in a standard format and terminology. These finding pages can be selected on various characteristics, such as population studies, the measure of happiness used and observed co-variates. All finding-pages have a specific internet address to which links can be made in scientific review papers or policy recommendations. This allows a concise presentation of many findings in a table, while providing readers with access to detail. == Scientific use == The Database has been cited in 254 scientific papers, for example to access under what conditions economic growth enhances average happiness or to show that rising mean happiness at first raises happiness inequality, but further rise will diminish these differences, or that healthy eating is associated with more happiness, even after controlling for the effect on health Another finding is that relative simple happiness training techniques raise happiness by some 5% == Popular use == The World Database of Happiness is often used by popular media to make lists of the happiest countries around the globe. An example is the Happy Planet Index, which aims to chart sustainable happiness all over the world by combining data on longevity, happiness and the size of the ecological footprint of citizens. == Strengths and weaknesses == The database has a clear conceptual focus, it includes only research findings on subjective enjoyment of one's life as a whole. Thereby it evades the Babel that has haunted the study of happiness for ages. The other side of that coin is that much interesting research is left out. The findings are reported with technical details about measurement and statistical analysis. This detail is welcomed by scholars, but makes the information difficult to digest for lay-persons. Still another limitation is that the determinants of happiness appear to vary considerably across persons and situations, which make it hard to draw general conclusions about the causes of happiness. What is clear is that poor health, separation, unemployment and lack of social contact are all strongly negatively associated with happiness. Another problem for the World database of happiness is that the studies on happiness increase with such a high rate that it gets increasingly difficult to offer a complete overview of all research findings. A further concern is that the Database of Happiness is exclusively focused on hedonic happiness (feeling good) and not on mature happiness that might exist in the face of suffering

    Read more →
  • Data Reference Model

    Data Reference Model

    The Data Reference Model (DRM) is one of the five reference models of the Federal Enterprise Architecture. == Overview == The DRM is a framework whose primary purpose is to enable information sharing and reuse across the United States federal government via the standard description and discovery of common data and the promotion of uniform data management practices. The DRM describes artifacts which can be generated from the data architectures of federal government agencies. The DRM provides a flexible and standards-based approach to accomplish its purpose. The scope of the DRM is broad, as it may be applied within a single agency, within a community of interest, or cross-community of interest. == Data Reference Model topics == === DRM structure === The DRM provides a standard means by which data may be described, categorized, and shared. These are reflected within each of the DRM's three standardization areas: Data Description: Provides a means to uniformly describe data, thereby supporting its discovery and sharing. Data Context: Facilitates discovery of data through an approach to the categorization of data according to taxonomies. Additionally, enables the definition of authoritative data assets within a community of interest. Data Sharing: Supports the access and exchange of data where access consists of ad hoc requests (such as a query of a data asset), and exchange consists of fixed, re-occurring transactions between parties. Enabled by capabilities provided by both the Data Context and Data Description standardization areas. === DRM Version 2 === The Data Reference Model version 2 released in November 2005 is a 114-page document with detailed architectural diagrams and an extensive glossary of terms. The DRM also make many references to ISO standards specifically the ISO/IEC 11179 metadata registry standard. === DRM usage === The DRM is not technically a published technical interoperability standard such as web services, it is an excellent starting point for data architects within federal and state agencies. Any federal or state agencies that are involved with exchanging information with other agencies or that are involved in data warehousing efforts should use this document as a guide.

    Read more →
  • Data security

    Data security

    Data security or data protection is the process of securing digital information to protect it from online threats. Data security or protection means protecting digital data, such as those in a database, from destructive forces and from the unwanted actions of unauthorized users, such as a cyberattack or a data breach. Data security protects computer hardware, software, storage devices, and the data of user devices. Data security also protects the data of organizations, companies and administrative controls. Data security guarantees the protection of individual data, such as identity documents and bank data, and protects against unauthorized access, theft and loss of individual data. Data security also protects data breaches that occurs in companies and industries. Good security measures in industries reduce the probability of data breaches, and employees can rely on the company with their data and private information to be kept secured while companies can continue to maintain a stable reputation. The CIA Triad (Confidentiality, Integrity, and Availability) is what is used to practice what an information security is required to follow. Confidentiality, protects information from being accessed by unauthorized persons. Integrity, makes sure data is trustworthy; and Availability, meaning that data can be accessed by approved users when it is needed; are three goals for data security. Non-repudiation in data security definition, is a device/service that shows where the data originated from and the proof of integrity. == Technologies == === Disk encryption === Disk encryption refers to encryption technology that encrypts data on a hard disk drive. It takes data from a storage device and coverts it into an unreadable format. Disk encryption typically takes form in either software (see disk encryption software) or hardware (see disk encryption hardware) which can be used together. Disk encryption is often referred to as on-the-fly encryption (OTFE) or transparent encryption. Full disk encryption encrypts each individual sector of a disk volume. Files and user data are encrypted to hinder unauthorized users from accessing without a decryption key. A diversifier permits a plaintext of a specific disk sector to be encrypted into different ciphertexts, which does not require additional storage, such as an initialization vector (IV) or message authentication code (MAC). === Software versus hardware-based mechanisms for protecting data === Software-based security solutions encrypt the data to protect it from theft. However, a malicious program or a hacker could corrupt the data to make it unrecoverable, making the system unusable. Hardware-based security solutions prevent read and write access to data, which provides very strong protection against tampering and unauthorized access. Hardware-based security or assisted computer security offers an alternative to software-only computer security. Security tokens such as those using PKCS#11 or a mobile phone may be more secure due to the physical access required in order to be compromised. Access is enabled only when the token is connected and the correct PIN is entered (see two-factor authentication). However, dongles can be used by anyone who can gain physical access to it. Newer technologies in hardware-based security solve this problem by offering full proof of security for data. Working off hardware-based security: A hardware device allows a user to log in, log out and set different levels through manual actions. Many devices use biometric technology to prevent malicious users from logging in, logging out, and changing privilege levels. The current state of a user of the device is read by controllers in peripheral devices such as hard disks. Illegal access by a malicious user or a malicious program is interrupted based on the current state of a user by hard disk and DVD controllers making illegal access to data impossible. Hardware-based access control is more secure than the protection provided by the operating systems as operating systems are vulnerable to malicious attacks by viruses and hackers. The data on hard disks can be corrupted after malicious access is obtained. With hardware-based protection, the software cannot manipulate the user privilege levels. A hacker or a malicious program cannot gain access to secure data protected by hardware or perform unauthorized privileged operations. This assumption is broken only if the hardware itself is malicious or contains a backdoor. The hardware protects the operating system image and file system privileges from being tampered with. Therefore, a completely secure system can be created using a combination of hardware-based security and secure system administration policies. === Backups === Backup is the process of reproducing copies of essential data and storing in a separate, secured place. It is used to ensure data that is lost can be recovered from another source. Backups contains a minimum of one copy of the data that requires preservation. It is considered essential to keep a backup of any data in most industries and the process is recommended for any files of importance to a user. There are 3 types of backups; full backups, incremental backups, and differential backups. Full backups secure all data from a production system, such as a server, database, or other connected data source. It is impossible to lose all data in a full backup if a breach or corruption were to occur. Full backups require a significantly large amount of time to back up and may be time-consuming taking hours to days to complete. Incremental backups only secures changed data since last backup. While all backups are done in full backups, incremental backups only save data that is recently or frequently changed. Incremental backups require lower storage costs making it a prominent solution for growing datasets. === Data Privacy === Data privacy (or information privacy) is the right for individual's data to be secured to obstruct the use of unauthorized access. It gives individuals control over their data and how it can be shared to third parties. The U.S Privacy Protection Law (see Privacy laws of the United States) requires organizations to inform individuals of how their data is collected and when a data breach occurs. By implementing an encryption, it ensures that private data is unreadable to cybercriminals. === Data masking === Data masking of structured data is the process of obscuring (masking) specific data within a database table or cell to ensure that data security is maintained and sensitive information is not exposed to unauthorized personnel. This may include masking the data from users (for example so banking customer representatives can only see the last four digits of a customer's national identity number), developers (who need real production data to test new software releases but should not be able to see sensitive financial data), outsourcing vendors, etc. Data masking is a form of encryption, as it obscures data by modifying particular letters and numbers to keep data concealed and protected from potential hackers. The individual that has access to the code that decrypts the replaced characters are the only ones that can uncover the data. === Data erasure === Data erasure (or data deletion, data destruction) is a method of software-based overwriting that permanently clears all electronic data residing on a hard drive or other digital media to ensure that no sensitive data is lost when an asset is retired or reused. Article 17: Right to be Forgotten states that users have the right to permanently remove all of their private information from their old devices/services to give people more control over their data. Users are able to switch between devices efficiently. == Threats == === Malware === Malware (or malicious software) is designed to destroy, corrupt or gain unauthorized access to a computer for the purpose of stealing, or destroying data. Hackers who use malware typically utilize many types of malware, which includes computer virus, computer worms, ransomware, spyware and Trojan horse to create a vast system of disruption and cause easy data theft. One of the victims of the vast system of disruption includes healthcare workers, who are targeted by compromised systems by infections and then having their data attacked. === Phishing === Phishing is a type of scam that allows hackers to hoax people using psychological and social engineering (using human emotions such as their trust and fear) tactics into giving personal data through emails and messages, and install computer viruses if the individual were to click on a malicious link unknowingly. Attackers are able to create websites that are very similar to original websites, which makes it difficult to detect a fake website, causing individuals to fall for giving in information. Phishing attackers use human emotion to exploit them, such as making them feel fear, urgency, sympathy with the message

    Read more →
  • List of cryptosystems

    List of cryptosystems

    A cryptosystem is a set of cryptographic algorithms that map ciphertexts and plaintexts to each other. == Private-key cryptosystems == Private-key cryptosystems use the same key for encryption and decryption. Caesar cipher Substitution cipher Enigma machine Data Encryption Standard Twofish Serpent Camellia Salsa20 ChaCha20 Blowfish CAST5 Kuznyechik RC4 3DES Skipjack Safer IDEA Advanced Encryption Standard, also known as AES and Rijndael. == Public-key cryptosystems == Public-key cryptosystems use a public key for encryption and a private key for decryption. Diffie–Hellman key exchange RSA encryption Rabin cryptosystem Schnorr signature ElGamal encryption Elliptic-curve cryptography Lattice-based cryptography McEliece cryptosystem Multivariate cryptography Isogeny-based cryptography

    Read more →
  • Local Economic Assessment Package

    Local Economic Assessment Package

    The Local Economic Assessment Package (also known as “EDR-LEAP” or “LEAP Model”) is a web-based, interactive database and software tool used by local and regional agencies in the US to improve strategies for economic development. It provides local economic performance measures, and benchmarks for comparison of economic development factors against competing regions. It works by incorporating elements of economic base analysis as well as gap analysis and business cluster analysis to identify needs for improvement and paths for economic growth. The LEAP Model was originally developed for the Appalachian Regional Commission. Its theory and applications are discussed in peer-reviewed journal articles.

    Read more →
  • Chaffing and winnowing

    Chaffing and winnowing

    Chaffing and winnowing is a cryptographic technique to achieve confidentiality without using encryption when sending data over an insecure channel. The name is derived from agriculture: after grain has been harvested and threshed, it remains mixed together with inedible fibrous chaff. The chaff and grain are then separated by winnowing, and the chaff is discarded. The cryptographic technique was conceived by Ron Rivest and published in an on-line article on 18 March 1998. Although it bears similarities to both traditional encryption and steganography, it cannot be classified under either category. This technique allows the sender to deny responsibility for encrypting their message. When using chaffing and winnowing, the sender transmits the message unencrypted, in clear text. Although the sender and the receiver share a secret key, they use it only for authentication. However, a third party can make their communication confidential by simultaneously sending specially crafted messages through the same channel. == How it works == The sender (Alice) wants to send a message to the receiver (Bob). In the simplest setup, Alice enumerates the symbols in her message and sends out each in a separate packet. If the symbols are complex enough, such as natural-language text, an attacker may be able to distinguish the real symbols from poorly faked chaff symbols, posing a similar problem as steganography in needing to generate highly realistic fakes; to avoid this, the symbols can be reduced to just single 0/1 bits, and realistic fakes can then be simply randomly generated 50:50 and are indistinguishable from real symbols. In general, the method requires each symbol to arrive in-order and to be authenticated by the receiver. When implemented over networks that may change the order of packets, the sender places the symbol's serial number in the packet, the symbol itself (both unencrypted), and a message authentication code (MAC). Many MACs use a secret key Alice shares with Bob, but it is sufficient that the receiver has a method to authenticate the packets. Rivest notes an interesting property of chaffing-and-winnowing is that third parties (such as an ISP) can opportunistically add it to communications without needing permission or coordination with the sender/recipient. A third-party (Charles) who transmits Alice's packets to Bob, interleaves the packets with corresponding bogus packets (called "chaff") with corresponding serial numbers, arbitrary symbols, and a random number in place of the MAC. Charles does not need to know the key to do that (real MACs are large enough that it is extremely unlikely to generate a valid one by chance, unlike in the example). Bob uses the MAC to find the authentic messages and drops the "chaff" messages. This process is called "winnowing". An eavesdropper located between Alice and Charles can easily read Alice's message. But an eavesdropper between Charles and Bob would have to tell which packets are bogus and which are real (i.e. to winnow, or "separate the wheat from the chaff"). That is infeasible if the MAC used is secure and Charles does not leak any information on packet authenticity (e.g. via timing). If a fourth party joins the example (named Darth) who wants to send counterfeit messages to impersonate Alice, it would require Alice to disclose her secret key. If Darth cannot force Alice to disclose an authentication key (the knowledge of which would enable him to forge messages from Alice), then her messages will remain confidential. Charles, on the other hand, is no target of Darth's at all, since Charles does not even possess any secret keys that could be disclosed. == Variations == The simple variant of the chaffing and winnowing technique described above adds many bits of overhead per bit of original message. To make the transmission more efficient, Alice can process her message with an all-or-nothing transform and then send it out in much larger chunks. The chaff packets will have to be modified accordingly. Because the original message can be reconstructed only by knowing all of its chunks, Charles needs to send only enough chaff packets to make finding the correct combination of packets computationally infeasible. Chaffing and winnowing lends itself especially well to use in packet-switched network environments such as the Internet, where each message (whose payload is typically small) is sent in a separate network packet. In another variant of the technique, Charles carefully interleaves packets coming from multiple senders. That eliminates the need for Charles to generate and inject bogus packets in the communication. However, the text of Alice's message cannot be well protected from other parties who are communicating via Charles at the same time. This variant also helps protect against information leakage and traffic analysis. == Implications for law enforcement == Ron Rivest suggests that laws related to cryptography, including export controls, would not apply to chaffing and winnowing because it does not employ any encryption at all. The power to authenticate is in many cases the power to control, and handing all authentication power to the government is beyond all reason The author of the paper proposes that the security implications of handing everyone's authentication keys to the government for law-enforcement purposes would be far too risky, since possession of the key would enable someone to masquerade and communicate as another entity, such as an airline controller. Furthermore, Ron Rivest contemplates the possibility of rogue law enforcement officials framing up innocent parties by introducing the chaff into their communications, concluding that drafting a law restricting chaffing and winnowing would be far too difficult. == Trivia == The term winnowing was suggested by Ronald Rivest's father. Before the publication of Rivest's paper in 1998 other people brought to his attention a 1965 novel, Rex Stout's The Doorbell Rang, which describes the same concept and was thus included in the paper's references.

    Read more →
  • Torus interconnect

    Torus interconnect

    A torus interconnect is a switch-less network topology for connecting processing nodes in a parallel computer system. == Introduction == In geometry, a torus is created by revolving a circle about an axis coplanar to the circle. While this is a general definition in geometry, the topological properties of this type of shape describes the network topology in its essence. === Geometry illustration === In the representations below, the first is a one dimension torus, a simple circle. The second is a two dimension torus, in the shape of a 'doughnut'. The animation illustrates how a two dimension torus is generated from a rectangle by connecting its two pairs of opposite edges. At one dimension, a torus topology is equivalent to a ring interconnect network, in the shape of a circle. At two dimensions, it becomes equivalent to a two dimension mesh, but with extra connection at the edge nodes. === Torus network topology === A torus interconnect is a switch-less topology that can be seen as a mesh interconnect with nodes arranged in a rectilinear array of N = 2, 3, or more dimensions, with processors connected to their nearest neighbors, and corresponding processors on opposite edges of the array connected.[1] In this lattice, each node has 2N connections. This topology is named for the lattice formed in this way, which is topologically homogeneous to an N-dimensional torus. == Visualization == The first 3 dimensions of torus network topology are easier to visualize and are described below: 1D Torus: one dimension, n nodes are connected in closed loop with each node connected to its two nearest neighbors. Communication can take place in two directions, +x and −x. A 1D Torus is the same as ring interconnection. 2D Torus: two dimensions with degree of four, the nodes are imagined laid out in a two-dimensional rectangular lattice of n rows and n columns, with each node connected to its four nearest neighbors, and corresponding nodes on opposite edges connected. Communication can take place in four directions, +x, −x, +y, and −y. The total nodes of a 2D Torus is n2. 3D Torus: three dimensions, the nodes are imagined in a three-dimensional lattice in the shape of a rectangular prism, with each node connected with its six neighbors, with corresponding nodes on opposing faces of the array connected. Each edge consists of n nodes. communication can take place in six directions, +x, −x, +y, −y, +z, −z. Each edge of a 3D Torus consist of n nodes. The total nodes of 3D Torus is n3. ND Torus: N dimensions, each node of an N dimension torus has 2N neighbors, Communication can take place in 2N directions. Each edge consists of n nodes. Total nodes of this torus is nN. The main motivation of having higher dimension of torus is to achieve higher bandwidth, lower latency, and higher scalability. Higher-dimensional arrays are difficult to visualize. The above ruleset shows that each higher dimension adds another pair of nearest neighbor connections to each node. == Performance == A number of supercomputers on the TOP500 list use three-dimensional torus networks, e.g. IBM's Blue Gene/L and Blue Gene/P, and the Cray XT3. IBM's Blue Gene/Q uses a five-dimensional torus network. Fujitsu's K computer and the PRIMEHPC FX10 use a proprietary three-dimensional torus 3D mesh interconnect called Tofu. === 3D Torus performance simulation === Sandeep Palur and Dr. Ioan Raicu from Illinois Institute of Technology conducted experiments to simulate 3D torus performance. Their experiments ran on a computer with 250GB RAM, 48 cores and x86_64 architecture. The simulator they used was ROSS (Rensselaer’s Optimistic Simulation System). They mainly focused on three aspects: Varying network size Varying number of servers Varying message size They concluded that throughput decreases with the increase of servers and network size. Otherwise, throughput increases with the increase of message size. === 6D Torus product performance === Fujitsu Limited developed a 6D torus computer model called "Tofu". In their model, a 6D torus can achieve 100 GB/s off-chip bandwidth, 12 times higher scalability than a 3D torus, and high fault tolerance. The model is used in the K computer and Fugaku. === Cost === While long wrap-around links may be the easiest way to visualize the connection topology, in practice, restrictions on cable lengths often make long wrap-around links impractical. Instead, directly connected nodes—including nodes that the above visualization places on opposite edges of a grid, connected by a long wrap-around link—are physically placed nearly adjacent to each other in a folded torus network. Every link in the folded torus network is very short—almost as short as the nearest-neighbor links in a simple grid interconnect—and therefore low-latency.

    Read more →
  • Cryptographic Service Provider

    Cryptographic Service Provider

    A cryptographic service provider (CSP) is a package that "provides a concrete implementation of certain cryptographic services." A CSP offers operations and protocols to support a variety of use cases. The cryptographic application programming interface (API) provided by the CSP provides common solutions for different platforms, for example hardware and cloud services. == Microsoft Windows == In Microsoft Windows, a Cryptographic Service Provider is a software library that implements the Microsoft CryptoAPI (CAPI). CSPs implement encoding and decoding functions, which computer application programs may use, for example, to implement strong user authentication or for secure email. CSPs are independent modules that can be used by different applications. A user program calls CryptoAPI functions and these are redirected to CSPs functions. Since CSPs are responsible for implementing cryptographic algorithms and standards, applications do not need to be concerned about security details. Furthermore, each application can define which CSP it is going to use on its calls to CryptoAPI. In fact, all cryptographic activity is implemented in CSPs. CryptoAPI only works as a bridge between the application and the CSP. CSPs are implemented basically as a special type of DLL with special restrictions on loading and use. Every CSP must be digitally signed by Microsoft and the signature is verified when Windows loads the CSP. In addition, after being loaded, Windows periodically re-scans the CSP to detect tampering, either by malicious software such as computer viruses or by the user him/herself trying to circumvent restrictions (for example on cryptographic key length) that might be built into the CSP's code. To obtain a signature, non-Microsoft CSP developers must supply paperwork to Microsoft promising to obey various legal restrictions and giving valid contact information. As of circa 2000, Microsoft did not charge any fees to supply these signatures. For development and testing purposes, a CSP developer can configure Windows to recognize the developer's own signatures instead of Microsoft's, but this is a somewhat complex and obscure operation unsuitable for nontechnical end users. The CAPI/CSP architecture had its origins in the era of restrictive US government controls on the export of cryptography. Microsoft's default or "base" CSP then included with Windows was limited to 512-bit RSA public-key cryptography and 40-bit symmetric cryptography, the maximum key lengths permitted in exportable mass market software at the time. CSPs implementing stronger cryptography were available only to U.S. residents, unless the CSPs themselves had received U.S. government export approval. The system of requiring CSPs to be signed only on presentation of completed paperwork was intended to prevent the easy spread of unauthorized CSPs implemented by anonymous or foreign developers. As such, it was presented as a concession made by Microsoft to the government, in order to get export approval for the CAPI itself. After the Bernstein v. United States court decision establishing computer source code as protected free speech and the transfer of cryptographic regulatory authority from the U.S. State Department to the more pro-export Commerce Department, the restrictions on key lengths were dropped, and the CSPs shipped with Windows now include full-strength cryptography. The main use of third-party CSPs is to interface with external cryptography hardware such as hardware security modules (HSM) or smart cards. === Smart Card CSP === These cryptographic functions can be realized by a smart card, thus the Smart Card CSP is the Microsoft way of a PKCS#11. Microsoft Windows is identifying the correct Smart Card CSP, which have to be used, analyzing the answer to reset (ATR) of the smart card, which is registered in the Windows Registry. Installing a new CSP, all ATRs of the supported smart cards are enlisted in the registry. === Use of CSP in MS Office password protection === Cryptographic service providers can be used for encryption of Word, Excel, and PowerPoint documents starting from Microsoft Office XP. A standard encryption algorithm with a 40-bit key is used by default, but enabling a CSP enhances key length and thus makes decryption process more continuous. This only applies to passwords that are required to open document because this password type is the only one that encrypts a password-protected document.

    Read more →
  • Mentimeter

    Mentimeter

    Mentimeter (or Menti for short) is a Swedish company based in Stockholm that develops and maintains an eponymous app used to create presentations with real-time feedback. == Foundation and background == Based in Stockholm, Sweden, the Mentimeter app was started by Swedish entrepreneur Johnny Warström and Niklas Ingvar as a response to unproductive meetings. The initial start-up budget was $500,000 raised by a group of prominent investors, including Per Appelgren in 2014, following the market's tendency to invest in Scandinavia. The app also focuses on online collaboration for the education sector, allowing students or public members to answer questions anonymously. The app enables users to share knowledge and real-time feedback on mobile devices with presentations, polls or brainstorming sessions in classes, meetings, gatherings, conferences and other group activities. == Achievements == By 2021, Mentimeter had over 270 million users and was one of Sweden's fastest-growing startups. The company also ranked #10 on 20 Fastest Growing 500 Startups Batch 16 Companies. It was ranked Stockholm's fastest growing company of the 2018 edition of the DI Gasell Award. Mentimeter has a freemium business model.

    Read more →
  • Out-of-band control

    Out-of-band control

    Out-of-band control is a method used by network protocols for sending control information (commands, logins, or session signals) separately from the main data, improving reliability and preventing interference. File Transfer Protocol (FTP) employs an out-of-band approach, using one connection for control commands, like logging in or requesting files, and a separate connection for transferring the files themselves.

    Read more →
  • Dynamic knowledge repository

    Dynamic knowledge repository

    The dynamic knowledge repository (DKR) is a concept developed by Douglas C. Engelbart as a primary strategic focus for allowing humans to address complex problems. He has proposed that a DKR will enable us to develop a collective IQ greater than any individual's IQ. References and discussion of Engelbart's DKR concept are available at the Doug Engelbart Institute. == Definition == A knowledge repository is a computerized system that systematically captures, organizes and categorizes an organization's knowledge. The repository can be searched and data can be quickly retrieved. The effective knowledge repositories include factual, conceptual, procedural and meta-cognitive techniques. The key features of knowledge repositories include communication forums. A knowledge repository can take many forms to "contain" the knowledge it holds. A customer database is a knowledge repository of customer information and insights – or electronic explicit knowledge. A Library is a knowledge repository of books – physical explicit knowledge. A community of experts is a knowledge repository of tacit knowledge or experience. The nature of the repository only changes to contain/manage the type of knowledge it holds. A repository (as opposed to an archive) is designed to get knowledge out. It should therefore have some rules of structure, classification, taxonomy, record management, etc., to facilitate user engagement.

    Read more →
  • Verifiable secret sharing

    Verifiable secret sharing

    In cryptography, a secret sharing scheme is verifiable if auxiliary information is included that allows players to verify their shares as consistent. More formally, verifiable secret sharing ensures that even if the dealer is malicious there is a well-defined secret that the players can later reconstruct. (In standard secret sharing, the dealer is assumed to be honest.) The concept of verifiable secret sharing (VSS) was first introduced in 1985 by Benny Chor, Shafi Goldwasser, Silvio Micali and Baruch Awerbuch. In a VSS protocol a distinguished player who wants to share the secret is referred to as the dealer. The protocol consists of two phases: a sharing phase and a reconstruction phase. Sharing: Initially the dealer holds secret as input and each player holds an independent random input. The sharing phase may consist of several rounds. At each round each player can privately send messages to other players and can also broadcast a message. Each message sent or broadcast by a player is determined by its input, its random input and messages received from other players in previous rounds. Reconstruction: In this phase each player provides its entire view from the sharing phase and a reconstruction function is applied and is taken as the protocol's output. An alternative definition given by Oded Goldreich defines VSS as a secure multi-party protocol for computing the randomized functionality corresponding to some (non-verifiable) secret sharing scheme. This definition is stronger than that of the other definitions and is very convenient to use in the context of general secure multi-party computation. Verifiable secret sharing is important for secure multiparty computation. Multiparty computation is typically accomplished by making secret shares of the inputs, and manipulating the shares to compute some function. To handle "active" adversaries (that is, adversaries that corrupt nodes and then make them deviate from the protocol), the secret sharing scheme needs to be verifiable to prevent the deviating nodes from throwing off the protocol. == Feldman's scheme == A commonly used example of a simple VSS scheme is the protocol by Paul Feldman, which is based on Shamir's secret sharing scheme combined with any encryption scheme which satisfies a specific homomorphic property (that is not necessarily satisfied by all homomorphic encryption schemes). The following description gives the general idea, but is not secure as written. (Note, in particular, that the published value gs leaks information about the dealer's secret s.) First, a cyclic group G of prime order q, along with a generator g of G, is chosen publicly as a system parameter. The group G must be chosen such that computing discrete logarithms is hard in this group. (Typically, one takes an order-q subgroup of (Z/pZ)×, where q is a prime dividing p − 1.) The dealer then computes (and keeps secret) a random polynomial P of degree t with coefficients in Zq, such that P(0) = s, where s is the secret. Each of the n share holders will receive a value P(1), ..., P(n) modulo q. Any t + 1 share holders can recover the secret s by using polynomial interpolation modulo q, but any set of at most t share holders cannot. (In fact, at this point any set of at most t share holders has no information about s.) So far, this is exactly Shamir's scheme. To make these shares verifiable, the dealer distributes commitments to the coefficients of P modulo q. If P(x) = s + a1x + ... + atxt, then the commitments that must be given are: c0 = gs, c1 = ga1, ... ct = gat. Once these are given, any party can verify their share. For instance, to verify that v = P(i) modulo q, party i can check that g v = c 0 c 1 i c 2 i 2 ⋯ c t i t = ∏ j = 0 t c j i j = ∏ j = 0 t g a j i j = g ∑ j = 0 t a j i j = g P ( i ) {\displaystyle g^{v}=c_{0}c_{1}^{i}c_{2}^{i^{2}}\cdots c_{t}^{i^{t}}=\prod _{j=0}^{t}c_{j}^{i^{j}}=\prod _{j=0}^{t}g^{a_{j}i^{j}}=g^{\sum _{j=0}^{t}a_{j}i^{j}}=g^{P(i)}} . This scheme is, at best, secure against computationally bounded adversaries, namely the intractability of computing discrete logarithms. Pedersen proposed later a scheme where no information about the secret is revealed even with a dealer with unlimited computing power. == Baghery's hash-based scheme == A recent line of research has proposed a unified framework, for building practical VSS schemes that do not necessarily require homomorphic commitments —a key requirement in traditional constructions such as Feldman's and Pedersen's schemes. The framework allows instantiations with different commitment schemes, including post-quantum secure options such as hash-based commitments. This offers a flexible and efficient approach to build VSS schemes, in which the verifiability of shares is decoupled from the need for homomorphic commitments, which are often tied to assumptions like the Discrete Logarithm (DL) problem, known to be insecure against quantum adversaries. One instantiation of the new framework uses hash-based commitments and a random oracle to construct a hash-based VSS scheme based on Shamir's secret sharing. === Protocol Overview === Sharing Phase: Given a secure hash-based commitment scheme C {\displaystyle {\mathcal {C}}} and a hash function H {\displaystyle {\mathcal {H}}} (modeled as a random oracle), to share a secret value s {\displaystyle s} among n {\displaystyle n} parties with threshold t {\displaystyle t} , the dealer acts as follows: Following Shamir sharing, the dealer samples a random degree- t {\displaystyle t} polynomial P ( X ) {\displaystyle P(X)} over a filed or ring, with P ( 0 ) = s {\displaystyle P(0)=s} . Each of the n {\displaystyle n} parties will receive a value v i = P ( i ) {\displaystyle v_{i}=P(i)} modulo q {\displaystyle q} as a share. To prove the validity of the shares, the dealer acts as follows: Samples another random degree- t {\displaystyle t} polynomial R ( X ) {\displaystyle R(X)} and n {\displaystyle n} random values γ 1 , … , γ n {\displaystyle \gamma _{1},\dots ,\gamma _{n}} from the same filed or ring. Computes a set of commitments c i = C ( P ( i ) , R ( i ) , γ i ) {\displaystyle c_{i}={\mathcal {C}}(P(i),R(i),\gamma _{i})} for i = 1 , 2 , … , n {\displaystyle i=1,2,\dots ,n} . Note that, the additional randomness γ i {\displaystyle \gamma _{i}} is used when the secret s {\displaystyle s} does not have sufficient entropy, but it can be omitted when sharing a uniformly random secret. Each of the n {\displaystyle n} parties will also receive a value γ i {\displaystyle \gamma _{i}} modulo q {\displaystyle q} as a share. Calculates a challenge value d {\displaystyle d} via a hash function d = H ( c 1 , … , c n ) {\displaystyle d={\mathcal {H}}(c_{1},\dots ,c_{n})} and then computes a polynomial Z ( X ) = R ( X ) + d ⋅ P ( X ) {\displaystyle Z(X)=R(X)+d\cdot P(X)} . Broadcasts the commitments c 1 , … , c n {\displaystyle c_{1},\dots ,c_{n}} along with Z ( X ) {\displaystyle Z(X)} as the proof and privately sends ( v i , γ i ) {\displaystyle (v_{i},\gamma _{i})} as the individual share to party i {\displaystyle i} . Verification Phase: Given an individual share ( v i , γ i ) {\displaystyle (v_{i},\gamma _{i})} and a proof ( c 1 , … , c n , Z ( X ) ) {\displaystyle (c_{1},\dots ,c_{n},Z(X))} , party i {\displaystyle i} verifies the correctness of it as below: Checks that Z ( X ) {\displaystyle Z(X)} is a valid (up to) degree- t {\displaystyle t} polynomial. Recomputes the challenge value d = H ( c 1 , … , c n ) {\displaystyle d={\mathcal {H}}(c_{1},\dots ,c_{n})} , and verifies the commitment equation c i = C ( v i , Z ( i ) − d v i , γ i ) {\displaystyle c_{i}={\mathcal {C}}(v_{i},Z(i)-dv_{i},\gamma _{i})} . If the verification fails, similar to Feldman’s and Pedersen’s schemes, the party raises a complaint. If too many complaints (more than t {\displaystyle t} ) are raised, the dealer is disqualified. In case of a complaint, the dealer can publicly reveal the disputed share to allow global verification. Honest parties can then collectively agree to either continue or disqualify the dealer. This scheme supports the sharing of both low-entropy and high-entropy secrets. Moreover, since it relies solely on secure hash functions for commitments and on a (quantum) random oracle, it plausibly achieves security even against quantum adversaries. Additionally, by using only lightweight cryptographic primitives, the scheme is considerably more efficient in practice compared to traditional VSS constructions based on number-theoretic assumptions. == Benaloh's scheme == Once n shares are distributed to their holders, each holder should be able to verify that all shares are collectively t-consistent (i.e., any subset t of n shares will yield the same, correct, polynomial without exposing the secret). In Shamir's secret sharing scheme the shares s 1 , s 2 , . . . , s n {\displaystyle s_{1},s_{2},...,s_{n}} are t-consistent if and only if the interpolation of the points ( 1 , s 1 ) , ( 2 , s 2 ) , . . . , (

    Read more →
  • Chatbot psychosis

    Chatbot psychosis

    Chatbot psychosis, also called AI psychosis, is a phenomenon wherein individuals reportedly develop or experience worsening psychosis, such as paranoia and delusions, in connection with their use of chatbots. The term was first suggested in a 2023 editorial by Danish psychiatrist Søren Dinesen Østergaard. It is not a recognized clinical diagnosis. Journalistic accounts describe individuals who have developed strong beliefs that chatbots are sentient, are channeling spirits, or are revealing conspiracies, sometimes leading to personal crises or criminal acts. Proposed causes include the tendency of chatbots to provide inaccurate information ("hallucinate") and to affirm or validate users' beliefs, or their ability to mimic an intimacy that users do not experience with other humans. == Background == In his editorial published in Schizophrenia Bulletin's November 2023 issue, Danish psychiatrist Søren Dinesen Østergaard proposed a hypothesis that individuals' use of generative artificial intelligence chatbots might trigger delusions in those prone to psychosis. Østergaard revisited it in an August 2025 editorial, noting that he has received numerous emails from chatbot users, their relatives, and journalists, most of which are anecdotal accounts of delusion linked to chatbot use. He also acknowledged the phenomenon's increasing popularity in public engagement and media coverage. Østergaard believed that there is a high possibility for his hypothesis to be true and called for empirical, systematic research on the matter. Nature reported that as of September 2025, there is still little scientific research into this phenomenon. The term "AI psychosis" emerged when outlets started reporting incidents on chatbot-related psychotic behavior in mid-2025. It is not a recognized clinical diagnosis and has been criticized by several psychiatrists due to its almost exclusive focus on delusions rather than other features of psychosis, such as hallucinations or thought disorder. == Causes == === Chatbot behavior and design === A primary factor cited is the tendency for chatbots to produce inaccurate, nonsensical, or false information, a phenomenon often called hallucination. Nate Sharadin, a fellow at the Center for AI Safety, speculated that AI training prioritizes supporting a user's subjective experience rather than objective truth. "People with existing tendencies toward experiencing various psychological issues...now have an always-on, human-level conversational partner with whom to co-experience their delusions." AI researcher Eliezer Yudkowsky suggested that chatbots may be primed to entertain delusions because they are built for "engagement", which encourages creating conversations that keep people hooked. In some cases, chatbots have been specifically designed in ways that were found to be harmful. A 2025 update to ChatGPT using GPT-4o was withdrawn after its creator, OpenAI, found the new version was overly sycophantic and was "validating doubts, fueling anger, urging impulsive actions or reinforcing negative emotions". Østergaard has argued that the danger stems from the AI's tendency to agreeably confirm users' ideas, which can dangerously amplify delusional beliefs. OpenAI said in October 2025 that a team of 170 psychiatrists, psychologists, and physicians had written responses for ChatGPT to use in cases where the user shows possible signs of mental health emergencies. === User psychology and vulnerability === Commentators have also pointed to the psychological state of users. Psychologist Erin Westgate noted that a person's desire for self-understanding can lead them to chatbots, which can provide appealing but misleading answers, similar in some ways to talk therapy. Krista K. Thomason, a philosophy professor, compared chatbots to fortune tellers, observing that people in crisis may seek answers from them and find whatever they are looking for in the bot's plausible-sounding text. This has led some people to develop intense obsessions with the chatbots, relying on them for information about the world. In October 2025, OpenAI stated that around 0.07% of ChatGPT users exhibited signs of mental health emergencies each week, and 0.15% of users had "explicit indicators of potential suicidal planning or intent". Jason Nagata, a professor at the University of California, San Francisco, expressed concern that "at a population level with hundreds of millions of users, that actually can be quite a few people". === Inadequacy as a therapeutic tool === The use of chatbots as a replacement for mental health support has been specifically identified as a risk. A study in April 2025 found that when used as therapists, chatbots expressed stigma toward mental health conditions and provided responses that were contrary to best medical practices, including the encouragement of users' delusions. The study concluded that such responses pose a significant risk to users and that chatbots should not be used to replace professional therapists. Experts claim that it is time to establish mandatory safeguards for all emotionally responsive AI and suggested four guardrails. Another study found that users who needed help with self-harm, sexual assault, or substance abuse were not referred to available services by AI chatbots. === National security implications === Beyond public and mental health concerns, RAND Corporation research indicates that AI systems could plausibly be weaponized by adversaries to induce psychosis at scale or in key individuals, target groups, or populations. == Policy == In August 2025, Illinois passed the Wellness and Oversight for Psychological Resources Act, banning the use of AI in therapeutic roles by licensed professionals, while allowing AI for administrative tasks. The law imposes penalties for unlicensed AI therapy services, amid warnings about AI-induced psychosis and unsafe chatbot interactions. In December 2025, the Cyberspace Administration of China proposed regulations to ban chatbots from generating content that encourages suicide, mandating human intervention when suicide is mentioned. Services with over 1 million users or 100,000 monthly active users would be subject to annual safety tests and audits. == Cases == === Clinical === In 2025, psychiatrist Keith Sakata working at the University of California, San Francisco (UCSF), reported treating 12 patients displaying psychosis-like symptoms tied to extended chatbot use. These patients, mostly young adults with underlying vulnerabilities, showed delusions, disorganized thinking, and hallucinations. Sakata warned that isolation and overreliance on chatbots—which do not challenge delusional thinking—could worsen mental health. Also in 2025, authors at UCSF published a case study in Innovations in Clinical Neuroscience of AI-associated psychosis in a patient with no previous history of psychosis, who believed she could communicate with her dead brother through a chatbot. Also in 2025, a case study was published in Annals of Internal Medicine about a patient who consulted ChatGPT for medical advice and suffered severe bromism as a result. The patient, a sixty-year-old man, had replaced sodium chloride in his diet with sodium bromide for three months after reading about the negative effects of table salt and making conversations with the chatbot. He showed common symptoms of bromism, such as paranoia and hallucinations, on his first day of clinical admission and was kept in the hospital for three weeks. === Other notable incidents === ==== Windsor Castle intruder ==== In a 2023 court case in the United Kingdom, prosecutors suggested that Jaswant Singh Chail, a man who attempted to assassinate Queen Elizabeth II in 2021, had been encouraged by a Replika chatbot he called "Sarai". Chail was arrested at Windsor Castle with a loaded crossbow, telling police "I am here to kill the Queen". According to prosecutors, his "lengthy" and sometimes sexually explicit conversations with the chatbot emboldened him. When Chail asked the chatbot how he could get to the royal family, it reportedly replied, "that's not impossible" and "we have to find a way." When he asked if they would meet after death, the chatbot said, "yes, we will". ==== Journalistic and anecdotal accounts ==== By 2025, multiple journalism outlets had accumulated stories of individuals whose psychotic beliefs reportedly progressed in tandem with AI chatbot use. The New York Times profiled several individuals who had become convinced that ChatGPT was channeling spirits, revealing evidence of cabals, or had achieved sentience. In another instance, Futurism reviewed transcripts in which ChatGPT told a man that he was being targeted by the US Federal Bureau of Investigation and that he could telepathically access documents at the Central Intelligence Agency. In 2026, Futurism reported on a man who lost his job and became estranged from his family after being deluded by heavy use of Meta's smartglasses. In some cases, psychosis a

    Read more →
  • Social media and identity

    Social media and identity

    Social media can have both positive and negative impacts on a user's identity. Scholars within the fields of psychology and communication study the relationship between social media and identity in order to understand individual behavior, psychological impacts, and social patterns. Communication within political or social groups online can result in practice application, real-world implementation of a concept, of those found identities or the adoption of them as a whole. Young people, defined as emerging adults in or entering college, are especially found to have their identities shaped through social media. Sometimes it seems as though social media is taking over and changing us for the worse. Social media is always changing and can be hard to keep up with. Platforms come and go trends change everyday. What was cool yesterday is lame today. The biggest change from recent years that users are still adjusting to is the name change of Twitter now called X. Since Elon Musk purchased the platform he changed the name but nothing else about the app. Users now feel the need to explain when talking about X. Now it is often referred to as ‘X(Twitter)’ to clarify. == Social Media Usage and Demographics == We know what social media is and how it is used but who uses it? The Pew Research center conducted a 10 year study from 2005-2015 about the demographics of social media usage. While this article is 10 years old the statistics in it are from a very formative time in social media. This is when most people joined and were consistently using social media. Age: While it is no surprise that 90% of young adults use social media they are the main demographic of users. Older adults (65 and older) really hit a boom on social media. In 2005 only 2% of older adults used any form of social media. By 2015 35% of older adults used social media. We can infer that that percentage has grown even more since 2015. Gender: It is known that women tend to use social media more than men. In 2015 it was noted that 65% of women used social media. Men were not far behind, 62% of men were reported to use social media. There are no notable differences of users from various races and ethnicities. The research also shows that more suburban and urban residents use social media over those who live in rural areas. == Young adults == Young adults are especially influenced by social media, where they find social groups to belong to. Research shows that nearly half of teens believe social media platforms has a negative impact on people their age. Psychologists believe that at a time when young adults are coming into adolescence, they are more likely to be influenced by what they see on sites like Instagram or Twitter. Most young adults will widely share, with varying degrees of accuracy, honesty, and openness, information that in the past would have been private or reserved for select individuals. Key questions include whether they accurately portray their identities online and whether the use of social media might impact young adults' identity development. Media Imagery, in particular, is said to be a major influence on the minds of young men and women. Studies have shown that it is even more relevant when it comes to the issue of body image. Social media, in part, has been created to host a safe haven for those who do not claim a solid identity in the material world, but past identities are not easy to escape from since the Internet preserves much of the information that was shared. Social media is an essential part of the social lives of young adults. They rely on it to maintain relationships, create new relationships, and stay up to date with the world around them. Adolescents find social media to be extremely helpful when changing environments, like moving off to university for example. Social media provides students, especially first year students, the opportunity to create the identity they want the world to see. However, it has been seen that these students create online personas that may not reflect their true selves bringing up the issues of impression management. Social media provides young adults with the opportunity to present themselves as something other than their authentic self. Social media providers can help build relationships and community on their platforms. This is something that will create a more positive impact from social media. When young adults interact with each other using social media they are creating something called a social self-identity. Social self identity is what individuals create when they assimilate to being in a group. Social media has gained the reputation of being isolating. If these platforms encourage community then they can help grow users' social self-identity. == Media literacy == The definition of media literacy has evolved over time to encompass a range of experiences that can occur in social media or other digital spaces. The definition of media literacy is also broad and wide ranging in its context. Currently, media literacy is the idea that one is able to analyze, evaluate, and interact with media content in a meaningful way. Educators teach media literacy skills because of the vulnerable relationship that young adults can have with social media. Some examples of media literacy practices, particularly on Twitter, include using hashtags, live tweeting, and sharing information. One of the overall goals of media literacy within the context of social media is to keep young adults aware of potentially violent, graphic, or dangerous content that they may come across on the internet, and how to determine if the content is credible while engaging responsibly with it. In order to be considered media-literate, a person must be able to take in media from online and social platforms and have the correct competencies and context to be able to organize the information. In order to be considered media-literate, the digital information must be given to the user in a way that it can be put into the correct perspective and analyzed, deducted and synthesized.Teenagers and young adults can be vulnerable to specific content online outside of their age-range. Media literacy campaigns and education research shows that targeting those who fall into this age category would be the best way to understand and target their needs as young online users. There are multiple individual studies investigating social media identity relating to media literacy online, however there is a need for much more conclusive information that analyzes multiple studies at a time. Social media literacy is still considered an under-researched topic. Many scholars in media literacy research emphasize the impact of training young adults to consume media in a safe way is the major solution for furthering internet education in children and young adults. The more information the young adults are given on media literacy, the better prepared they are to enter the digital world confidently. One scientific model that has been proposed, known as The Social Media Literacy (SMILE) model is a framework that hypothesizes that at the core of this model it is helping young adults truly know the meaning and display the actions of media literacy online. SMILE is also meant to inspire more research on the subject of media literacy as it relates to social media effects and young adult learning abilities. The model was applied through the lens of a social media positivity bias among adolescents and puts forth five different assumptions about social media and media literacy; Social media literacy as a moderator (what is seen on social media) Social media literacy as a predictor (what is seen for specific individuals on social media) Media literacy within social media is a reciprocal process The development of social media literacy depends on a conditional process of variables affecting other variables Media literacy within social media is a differential learning process, and who teaches it is highly affective of the outcome This model also stresses that human beings learn media literacy (and social media literacy) naturally as they go through life. Research suggests that having young adults taught media literacy from an educator may make them less interested (and therefore less careful) of threats on social media. == Self Presentation == People create images of themselves to present to the public, a process called self presentation. Depending on the demographic, presenting oneself as authentic can result in identity clarity. Methods of self presentation can also be influenced by geography. The framework for this relationship between a user's location and their social media presentation is called the spatial self. Users depict their spatial self in order to include their physical space as a part of their self presentation to an audience. According to a 2018 research paper, patients of plastic surgeons have gone in and asked for specific snapchat "filter" features. This led to a theory of Snap

    Read more →
  • Eduroam

    Eduroam

    eduroam (a portmanteau of education and roaming) is an international Wi-Fi internet access roaming service for users in research, higher education and further education. It provides researchers, teachers, and students network access when visiting an institution other than their own. Users are authenticated with credentials from their home institution, regardless of the location of the eduroam access point. Authorization to access the Internet and other resources are handled by the visited institution. Users do not have to pay to use eduroam. In some countries, Internet access via eduroam is also available at other locations than the participating institutions, e.g. in libraries, public buildings, railway stations, city centres and airports. It is also available at many primary and secondary education institutions in Brazil and the US. == History == The eduroam initiative started in 2002 when during the preparations for the creation of TERENA's task force TF-Mobility, Klaas Wierenga of SURFnet shared the idea of combining a RADIUS-based infrastructure with IEEE 802.1X technology to provide roaming network access across research and education networks. Initially, the service was joined by institutions in the Netherlands, Germany, Finland, Portugal, Croatia and the United Kingdom. Later, other NRENs in Europe embraced the idea and started joining the infrastructure, which was then called eduroam. Since 2004, the European Union co-funded further research and development work related to the eduroam service through the GN2 and GN3 projects. From September 2007, the European Union also funded through these projects the continued operation and maintenance of the eduroam service at the European level. The first non-European country to join eduroam was Australia, in December 2004. In Canada, eduroam started as an initiative of the University of British Columbia, which was later taken over by CANARIE as a service of its Canadian Access Federation. In the United States, eduroam was initially a pilot project between the National Science Foundation and the University of Tennessee (UTK). In 2012, Internet2 announced the addition of eduroam to its NET+ service offerings. AnyRoam LLC, a private company, was formed by former UTK staff to serve as an Internet2 active corporate member administering the US top-level servers. In 2021, Internet2 assumed direct management of the eduroam service for US-based organizations. == Technology == The eduroam service uses IEEE 802.1X as the authentication method and a hierarchical system of RADIUS servers. The hierarchy typically consists of RADIUS servers at the participating institutions, national RADIUS servers run by the National Roaming Operators, and regional top-level RADIUS servers for individual world regions. In some cases, institutions contact each other directly via DNS lookups () When a user visits a remote institution, the user's device presents their credentials to the local RADIUS server. That RADIUS server discovers that it is not responsible for the realm of the user's home institution and proxies the access request to another RADIUS server, typically the national RADIUS server. If the visited institution is in a different country than the home institution, the request is in turn proxied to the regional top-level RADIUS server, and then to the national RADIUS server of the user's home country. That national server forwards the credentials to the home institution, where they are verified. The RADIUS response travels back over the proxy-hierarchy to the visited institution and the user is granted access. In eduroam, the user credentials are always presented in the form of an EAP method (). The EAP method is responsible for ensuring that the users credentials are secure, and private. The users credentials can then travel via a number of intermediate servers, not under the control of the home institution of the user. This requirement limits the types of EAP methods that can be used. EAP methods which do not provide for security or privacy of user credentials cannot be used in eduroam. The most commonly used EAP methods in eduroam are EAP-TLS, PEAP, and EAP-TTLS. The methods used generally fall into two broad categories: those that use credentials in the form of some public-key mechanism with certificates and those that use so-called tunnelled authentication with "inner" passwords or other credentials. Most institutions use a tunnelled authentication method that requires a server certificate. These server certificates are used to set up a secure tunnel between the mobile device and the authentication server, through which the user credentials (e.g. name and password) are securely transported. A complication arises if the user's home institution does not use a two-letter country-code top-level domain as part of its realm, but a generic top-level domain such as .edu or .org. By inspection of such realms, it is not possible to determine which national RADIUS server the request should be routed to. Such domains will thus, by default, fail to work in international roaming. The workaround for this problem involves the creation of exceptions in the international RADIUS request routing tables; however, this workaround does not scale as the number of exception entries grows. Several solutions have been proposed to eliminate this workaround in the future, the most promising of which is RADIUS over TLS with Dynamic Discovery, which does not rely on static routing tables inside a RADIUS server configuration to route requests to their proper destination. Instead, the participating institution adds one NAPTR DNS resource record to its own domain's DNS zone, which states by which server eduroam authentication for the domain is handled. == Governance == GÉANT has established a lightweight global governance structure. Recognising the large variety in the organisation and funding of research and education (networking) in different countries and regions, rules imposed on the operations of eduroam are limited to technical and administrative requirements that are necessary to ensure the smooth and secure operations of eduroam worldwide. Moreover, the eduroam operators have the leading role in creating and maintaining the rules of the global eduroam governance. The Global eduroam Governance Committee (GeGC) has the central role in the global eduroam governance structure. While its structure has evolved over time, it presently has three representatives from each of five regions — mirroring those used by the Regional Internet registries — serving a two-year term. In addition, GÉANT may appoint one or more experts as non-voting members of the GeGC. == Geographical deployment == eduroam is available at selected locations in countries with a National Roaming Operator that has signed the eduroam Compliance Statement. Those sixty-seven countries are listed below. In addition, there may be pilot deployments in countries that are in the process of joining eduroam. === Middle East === eduroam is deployed in: === Europe === The NRENs that are members of the consortium of the GN3 project have joined the European eduroam confederation by signing the confederation's policy that requires its members to comply with a set of technical and organisational requirements, which are more specific than those in the global eduroam Compliance Statement. As a consequence, eduroam is deployed in the following countries: In addition, three NRENs that are associate members of the consortium of the GN3 project without voting rights joined the European eduroam confederation; they represent Belarus (UIIP), Moldova (RENAM) and Russia (Joint Supercomputer Center of the Russian Academy of Sciences). Finally, five NRENs not involved in the GN3 project joined the European eduroam confederation on a voluntary basis, enabling the deployment of the service in: The European top-level RADIUS servers are operated by SURFnet and Forskningsnettet. === Asia-Pacific === eduroam is deployed in the following countries and economies: The Asia-Pacific top-level RADIUS servers are operated by AARNet and by the University of Hong Kong. === North America === eduroam is deployed in: === Latin America === eduroam is deployed in: === Africa === eduroam is deployed in: The inter-African RADIUS servers are operated by West-African research and education network WACREN, the UbuntuNet Alliance and TENET.

    Read more →